GEDA AT CONEXPO 2023

At this year's ConExpo in Las Vegas, GEDA USA will be showing an excerpt from its current product range. From compact rope hoists for craftsmen, such as the GEDA Maxi and the GEDA LIFT, to versatile material lifts and transport platforms, to the GEDA MH 660 passenger and material lift. There is hardly a construction challenge that cannot be mastered with a height access solution from GEDA!

Directly at the GEDA booth, some exhibits can be admired and the experts of the height access technology are available for all questions. This year the well-known and appreciated GEDA transport platforms celebrate their 25th anniversary. Not only for this reason, the transport platforms are in the foreground this year, but also to present the new and innovative version of the TP4400.

While many of our trade fair visitors may operate a construction or industrial hoist every day, they certainly have never experienced one in the virtual world. The GEDA product portfolio is consequently not the only attraction directly at the trade fair stand, but also the GEDA VR worlds that were launched exclusively at the event. An interactive virtual environment will be appealing to all senses of the visitors. Upon entering our GEDA virtual reality showrooms, visitors can discover the opportunities offered by GEDA on a spectacular trip around the world. A variety of different GEDA products are in use in a diverse range of applications all over the world. The trade fair visitors are among to ride on our transport platforms – in a breathtaking international scenery and of course live at the trade fair stand. The key features are explained – all without leaving the trade fair grounds. This allows all visitors to experience what virtual reality feels like. We have gone to great lengths to present this topic in a manner fit for an event like the CONEXPO, which is unlike any other trade fair.

TP 1100 TRANSPORT PLATFORM

GEDA USA’s commitment to providing leading-edge, quality products is evident in the GEDA TP 1100 transport platform that can accommodate both people and materials. Hoist material loads up to 1875 lbs in material mode or 1100 lbs or 4 people in passanger mode. or a combination of personnel and products, up to four people.

The platform offers safety and efficiency as it hauls paneling, scaffolding, concrete block pallets, and other material to heights up to 330 feet. Dual lifting speeds operate at 40 or 80 feet per minute. Assembly of the GEDA TP 1100 is user-friendly, making lifting loads easier than ever.

GEDA TP 1100 FEATURES:

SAFETY FEATURES INCLUDE:

• Hot dipped galvanized steel landing level safety gates
• Locking sliding doors
• Captive screws and safety nuts
• Safety overspeed governor
• Overload protection device
• Safety stop at 6' 6" (2m) above ground
• Safety limit switches and landing cams
• Proximity sensor
• Diagnostics system
• Overhead roof protection
• Emergency stop button
• Emergency lowering system

Gates and ramps for loading and unloading materials crafted from hot-dipped galvanized steel ensure optimum strength and safety.

 

Model	GEDA TP 1100
Cargo	People & Material
Load capacity (material) Load capacity (people)	1875 lbs 1100 lbs or 4 people
Lifting height	330 ft
Lifting speed	40 or 80 ft/min

 

TP 4400 MATERIAL TRANSPORT PLATFORM

The GEDA TP 4400 transport platform lifts up to 330 feet in height and operates at two speed levels for your convenience and comfort level; choose between 40 or 80 feet per minute. The platform configuration can be customized for your specific needs, and the GEDA 4400 TP offers a variety of platform choices as well as a roof option. Wide platforms allow easy loading and unloading.

SAFETY FEATURES INCLUDE:

• Hot dipped galvanized steel landing level safety gates
• Locking sliding doors
• Captive screws and safety nuts
• Safety overspeed governor
• Overload protection device
• Safety stop at 12' 10" (3m) above ground
• Safety limit switches and landing cams
• Proximity sensor
• Diagnostics system
• Overhead roof protection
• Emergency stop button
• Emergency lowering system

GEDA USA’s transport platforms are single and dual mast systems, making them easy to assemble and operate. The efficiency of use cuts down on overhead costs, worker fatigue and time spent traveling to higher-story worksites. Reduced physical strain on personnel contributes to a lower risk of on-the-job accidents and injuries.

 

Model	GEDA TP 4400
Cargo	People & Material
Load capacity (material) Load capacity (people)	4400 lbs 4 people
Lifting height	330 ft
Lifting speed	40 or 80 ft/min

 

GEDA MAXI

With two lifting speeds, easy assembly and extensive safety features, the convenient rope hoists are the ideal helpers for efficient, yet safe transport of scaffolding elements and construction materials.

The manual drive of the rope drum is not transported upwards, but simply fastened to the scaffolding at the bottom, while the lightweight swivel arm is attached at the top of the scaffold at the desired height. This even allows quick and easy relocation of the rope hoists during different construction phases.

A broad selection of accessories and load handling devices turns the compact rope hoists into true all-round talents at construction sites. Whether bulky scaffolding elements, loaded wheelbarrows, buckets or other construction materials – the GEDA Maxi have been known in the construction industry for decades and ensure easy and efficient material transport at the press of a button.

Model	GEDA MAXI
Cargo	Material
Load capacity (material)	264 lbs
Lifting height	230 ft
Rope length	266 ft

 

LADDER LIFTS FOR LIFTING ROOFING MATERIALS

GEDA USA’s original guided wire rope ladder hoist is used by roofers, construction workers and scaffolders because it provides easy, reliable transport for interior work, refurbishment or repairs on flat-roof buildings. Crafted from durable, sturdy aluminum and steel wire rope, the ladder hoist easily transports roof shingles, construction materials and solar panels.

Roof repairs, interior renovations and other work requiring bulk load delivery can be made safer and more efficient with the GEDA USA’s guided rope ladder hoist. There are multiple load receptacles for different types of equipment or building materials. Ladder hoists are proven to save time and effort on the jobsite.

Model	GEDA LIFT 250 COMFORT
Cargo	Material
Load capacity (material)	550 lbs
Lifting height	62 ft
Lifting speed	70 ft/min

 

MH 660 TEMPORARY MATERIAL HOIST

Reputable global supplier of rack & pinion hoists, transport platforms and construction elevators, GEDA USA is proud to announce the GEDA MH 660 Material Hoist. Ideal for scaffolders, tradesmen and construction crews at temporary installations, this innovative material hoist has a load capacity of 660 lbs and a lifting speed of 65 ft/min.

The GEDA MH 660 is easy to maintain, assemble and service due to its construction from lightweight 6’ 6” aluminum mast segments. In addition, the GEDA MH 660 Material Hoist is equipped with a spacious load platform that accommodates a variety of construction materials and other bulky cargo, so it can double as a permanent installation in some environments.

 

TEMPORARY/PERMANENT HOIST FEATURES:

• 240V power supply to suit your application requirements
• Base unit with included chassis, cable bin and trailing cable
• Landing level safety gate
• Overload device and emergency stop button for improved safety

Model	GEDA MH 660
Cargo	Material
Load capacity (material)	660 lbs
Lifting height	165 ft
Lifting speed	65 ft/min

Contact one of our sales representatives today
to inquire about a quote from GEDA - USA
or call us today at 866-973-4332

« All News